SOILREDEF,<soil>,<dir>

NOT APPLICABLE TO CURRENT VERSION

This command will redefine the excavation volume layering for a 3D model based on a 2D soil model. Both models should be in ACS-SASSI User Interface memory before using this command. The user should select the 3D model to be changed by using the ACTM before using this command. Only the layer list and the excavation volume layer information of the 3D model will be changed by this command.

The 2D soil model must be defined on the global X-Z plane. The dir argument can be used to apply the soil model the X-Z plane to the Y-Z volume of the excavation volume.

All excavation volume elements for the 3D model must be explicitly defined by ETYPE or ETYPEGEN before using this command. The soil layering redefinition can only be applied to the global coordinate system, but the user can use ROTATE command to adjust the orientation of the 3D model before using this command.

• soil - the 2D soil model number
• dir - horizontal direction
  • 0 - X axis
  • 1 - Y axis