MOTION,<opmode>,<out>,<fsave>,<dur>,<res>,<freq1>,<freq2>,<fstep>, <mult>,<max>,<rec1>,<rec2>,<fopt>,<bl>,<smo>,<cplx>,<cnvrt>,<pzadj>, <interp>

defines the following analysis options for ACS SASSI MOTION module:

• <opmode> - operation mode
  • 0 - complete solution
  • 1 - data check only
• <out> - output option
  • 0 - full output
  • 1 - only transfer functions to be output
• <fsave> - Save File 12/13
  • 0 - Don't save 12 or 13
  • 1 - Save File 13
  • 2 - Save File 12
• <dur> - total duration of time histories to be plotted
• <res> - type of response
  • 0 - output only displacements
  • 1 - output only velocities
  • 2 - output only accelerations
• <freq1> - first frequency used in response spectrum analysis
• <freq2> - last frequency used in response spectrum analysis
• <fstep> - total number of frequency steps for response spectra
• <mult> - multiplication factor for scaling time history
• <max> - maximum value of time history to be used. The values of time history will be scaled to the given maximum value.
• <rec1> - first record of time history file to be written to analysis file
• <rec2> - last record of time history file to be written to analysis file (default: last record from file)
• <fopt> - time history file option
  • 0 - file contains time step on the first line, one acceleration on each other line
  • 1 - file contains pairs of time step and acceleration on each line
• <bl> - baseline correction
  • 0 - no correction
  • 1 - with correction
• <smo> - smoothing parameter
• <cplx> - determine if the RS will be complex or not
• <cnvrt> - motion convert?
• <pzadj> - Phase Adjustment parameter
• <interp> - Motion interpolation Option

Note: This instruction is provided for input files. To set the analysis options for the ACS SASSI MOTION module from the ACS SASSI PREP or SASSI User Interface, use the Options / Analysis menu option.