ANALYS,<opmode>,<type>,<mode>,<save>,<prnt>,<fopt>,<ang>,<xc>, <yc>,<zc>,<impe>

defines the following analysis options for ACS SASSI ANALYS module:

<opmode> - operation mode

• 0 - complete solution
• 1 - data check only

<type> - analysis type

• 0 - seismic
• 1 - foundation vibration

<mode> - analysis mode

• 0 - initiation
• 1 - new structure
• 2 - new seismic environment
• 3 - new dynamic loading

<save> - file save option

• 0 - do not save Files 6
  
• 1 - save Files 6
  

<prnt> - print option for transfer functions

• 0 - do not print
  
• 1 - print
  

<fopt> - frequency option

• 0 - take frequencies from frequency set
  
• 1 - take frequencies from File1 (or File9)
  

<ang> - coordinate transformation angle

<xc> - x-coordinate of control point

<yc> - y-coordinate of control point

<zc> - z-coordinate of control point

<impe> - calculation mode for the global impedances of the foundation

• 0 - no calculations
  
• 1 - calculate the global impedances and then obtain the transfer functions for the seismic SSI system
  
• 2 - calculate the global impedances and stop
  

Note: This instruction is provided for input files. To set the analysis options for the ACS SASSI ANALYS module from the ACS SASSI PREP and Submodeler, use the Options / Analysis command.