ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== ANALYS Command ======

__ANAL__YS,<opmode>,<type>,<mode>,<save>,<prnt>,<fopt>,<ang>,<xc>,
<yc>,<zc>,<impe>,[simul],[ffr]


defines the following analysis options for ACS SASSI [[SASSI:ANALYS]] module:

  * opmode - operation mode
    * 0 - complete solution
    * 1 - data check only
  * type - analysis type
    *  0 - seismic
    * 1 - foundation vibration
  * mode - analysis mode
    * 0 - initiation
    * 1 - new structure
    * 2 - new seismic environment
    * 3 - new dynamic loading
  * save - file save option
    * 0 - do not analysis restart files
    * 1 - save analysis restart files
  * prnt - print option for transfer functions
    * 0 - print complex transfer function
    * 1 - print transfer function amplitude only
  * fopt - frequency option
    * 0 - take frequencies from frequency set
    * 1 - take frequencies from File1 (or File9)
  * ang - coordinate transformation angle
  * xc - x-coordinate of control point
  * yc - y-coordinate of control point
  * zc - z-coordinate of control point
  * impe - calculation mode for the global impedances of the foundation
    * 0 - no calculations
    * 1 - calculate the global impedances and then obtain the transfer functions for the seismic SSI system
    * 2 - calculate the global impedances and stop
  * simul - number of simultaneous cases to be simulated. (default = 0)
  * ffr - Free Field Randomization
    * 0 - Load (default)
    * 1 - Motion 

Note: This instruction is provided for input files. To set the analysis options for the ACS SASSI [[SASSI:ANALYS]] module from the ACS SASSI [[SASSI:PREP]] and [[SASSI:acs-sassi_user_interface|ACS-SASSI User Interface]], use the Options / Analysis command.

ACS SASSI Documentation

User Tools

Site Tools

Page Tools