====== MOTION Command ======

__MOTI__ON,<opmode>,<out>,<fsave>,<dur>,<res>,<freq1>,<freq2>,<fstep>,
<mult>,<max>,<rec1>,<rec2>,<fopt>,<bl>,<smo>,<cplx>,<cnvrt>,<pzadj>, <interp>
	
defines the following analysis options for ACS SASSI [[SASSI:MOTION]] module:

  * <opmode> - operation mode
    * 0 - complete solution
    * 1 - data check only
  * <out> - output option
    * 0 - full output
    * 1 - only transfer functions to be output
  * <fsave> - Save File 12/13
    * 0 - Don't save 12 or 13
    * 1 - Save File 13
    * 2 - Save File 12
  * <dur> - total duration of time histories to be plotted
  * <res> - type of response
    * 0 - output only displacements
    * 1 - output only velocities
    * 2 - output only accelerations
  * <freq1>	- first frequency used in response spectrum analysis
  * <freq2>	- last frequency used in response spectrum analysis
  * <fstep>	- total number of frequency steps for response spectra
  * <mult> - multiplication factor for scaling time history
  * <max> - maximum value of time history to be used. The values of time history will be scaled to the given maximum value.
  * <rec1> - first record of time history file to be written to analysis file
  * <rec2>	- last record of time history file to be written to analysis file (default: last record from file)
  * <fopt>	- time history file option
    * 0 - file contains time step on the first line, one acceleration on each other line
    * 1 - file contains pairs of time step and acceleration on each line
  * <bl> - baseline correction
    * 0 - no correction
    * 1 - with correction
  * <smo>	- smoothing parameter 
  * <cplx>		- determine if the RS will be complex or not 
  * <cnvrt>	- motion convert?
  * <pzadj>	- Phase Adjustment parameter
  * <interp>	- Motion interpolation Option 

**Note:** This instruction is provided for input files. To set the analysis options for the ACS SASSI MOTION module from the ACS SASSI [[SASSI:PREP]] or [[SASSI:acs-sassi_user_interface| SASSI User Interface]], use the Options / Analysis menu option.