ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Analysis Options ======

The Analysis Options Menu Selection will bring up a window that allows the user to set options for the model that will be used by the modules for simulation. The window is broken up into tabs by module. Some of the windows share variables and if changed changed in one window the variable will change in all windows

Select Analysis from the Options submenu. 	

This command is used to set the analysis options for the active module. The Analysis Options dialog box contains the following Topics:

^ Tab Name ^ Contents ^ 
| [[sassi:user_interface:options:EQUAKE]] | Sets the options for the ACS SASSI EQUAKE module |
| [[sassi:user_interface:options:SOIL]] | Sets the options for the ACS SASSI SOIL module |
| [[sassi:user_interface:options:SITE]] | Sets the options for the ACS SASSI SITE module |
| [[sassi:user_interface:options:POINT]] | Sets the options for the ACS SASSI POINT module |
| [[sassi:user_interface:options:HOUSE]] | Sets the options for the ACS SASSI HOUSE module |
| [[sassi:user_interface:options:ANALYS]] | Sets the options for the ACS SASSI ANALYS module |
| [[sassi:user_interface:options:FORCE]] | Sets the options for the ACS SASSI FORCE module |
| [[sassi:user_interface:options:MOTION]] | Sets the options for the ACS SASSI MOTION module |
| [[sassi:user_interface:options:STRESS]] | Sets the options for the ACS SASSI STRESS module |
| [[sassi:user_interface:options:RELDISP]] | Sets the options for the ACS SASSI RELDISP module | 
| [[sassi:user_interface:options:NONLINEAR]] | Sets the options for the ACS SASSI PANEL module |
| [[sassi:user_interface:options:AFWRITE]] | Sets the options for the [[com:AFWRITE]] and [[com:CHECK]] commands |

ACS SASSI Documentation

User Tools

Site Tools

Page Tools