ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Submodeler ======
===== Overview =====

ACS SASSI Submodeler is the current graphical user interface for the simulation modules in as of the ACS SASSI V3.0.0 installation kit. 

===== Usage =====

When the user Opens Submodeler the interface will look very similar to [[SASSI:PREP]] interface. Unlike Prep, on entry to the Submodeler there is an empty model ready to be used without requiring the use of the new Menu option to create or load a model the user should consult the [[:Getting Started]] topic. When the model is ready for simulation the user can launch the required [[ :Modules ]] directly from the Submodeler without having to go to [[SASSI:Main]]. The File conversion processes from [[SASSI:Converters| File Converter]] has been expanded and allows the user to directly input model data into Submodeler without need to write a [[file:pre]] first.
   
{{submodeler.png}}

==== New Capabilites ====

=== Multiple Models ===

The first new capability of the Submodeler is the ability to open and use multiple models at the same time. Submodeler has a state machine protocol for accessing and creating new models. All commands and user interface options affect the current active model. User should be familiar with this concept because it is the same way that the [[com:GROUP]] and [[com:E|Element]] commands worked in Prep and continue to work in Submodeler. All models in the Submodeler are referenced  by positive integer number with the default model (empty model on opening) number being 0. To access any model the user must use the [[com:ACTM]] command

=== Large Models ===

The [[SASSI:size limitations]] on models has not changed in the submodeler. It was found that many functions of Prep are very inefficient when dealing with models that are close to the limit of SASSI. First, when Loading an [[file:pre]] only the comments in the file and errors encounter are reported to the command history. The command entry and acceptance shown in the command history during input dramatically slows down the input process and with volume of commands in a larger model will overwrite the error. This sped input of a pre file that take 15 minutes in PREP to under a minute in the Submodeler. The Submodeler uses OpenGL 4.0 for graphics which allow for better display of large models. Finally the internal storage format of data in the Submodeler was changed to decrease the memory needed to store each model.        

=== Submodeling and Cuts ===

The Submodeler name implies that a user may take a piece of one model and use that as a separate model this is covered in the [[example:Submodeling]] example. 

=== Merging Models ===

The Submodeler has the ability to Merge two models in memory into a single model. The Process is described in the [[example:Merge]] topic.

===== Controls =====
  * [[SASSI:Submodeler:Menu Options]]
  * [[:Command Reference]]
ACS SASSI Documentation

User Tools

Site Tools

Page Tools
