ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Non-linear Modeling ======

ACS SASSI has a process to simulate a model with non-linear materials. 

===== Creating a Non-linear Model =====


==== Starting From a Linear Model ====

ACS-SASSI User Interface has commands to change a Linear model so it can be used in a non-linear analysis 

=== Example(s) ===

<code>
* Example of splitting a model for Creating a Non-Linear model

* Load a starting model and copy it to create a Panel Model
ACTM,1
INP, ./Model1.pre,C:/Models/Demo/ *Starting model
* Move to copy of the model to create a panel model later
CPMODEL,2
*delete the shell groups from this model
gdel,3,4
gdel,7,10
...
GCOM
ACTM,2
*create the panel model
WALLFLR
* further refine the panels
...

ACTM,1
*Recombine the model panels with the non-shell elements
MERGEPANEL,2
</code>

**NOTE(s)** : General Nonlinear example command list or *.pre file. The first ellipsis is a list [[com:GDEL]] commands to remove the shell groups from the initial model. The second ellipsis will contain different commands depending on the model.

ACS SASSI Documentation

User Tools

Site Tools

Page Tools