ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== SOILREDEF Command ======

SOILREDEF,<soil>,<dir>

This command will redefine the excavation volume layering for a 3D model based on a 2D soil model. Both models should be in Submodeler memory before using this command. The user should select the 3D model to be changed by using the [[com:ACTM]] before using this command. Only the layer list and the excavation volume layer information of the 3D model will be changed by this command.

The 2D soil model must be defined on the global X-Z plane. If the layering modifications is to be applied to the Y horizontal of the 3D model the dir argument can be used to transform the soil model form the X-Z plane to the Y-Z plane.     

All excavation volume elements for the 3D model must be explicitly defined by [[com:ETYPE]] or [[com:ETYPEGEN]] before using this command. 

  * soil - the 2D soil model
  * dir - horizontal direction
    * 0 - X axis
    * 1 - Y axis

ACS SASSI Documentation

User Tools

Site Tools

Page Tools