ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== SOIL Command ======

SOIL,<nrval>,<cof>,<header>,<outcrop>,<save>,<iter>,<ratio>,<grav>,<format>

defines the analysis options for ACS SASSI [[SASSI:SOIL]] module:

  * <nrval> - number of acceleration values to be read from the time history file
  * <cof> - cut-off frequency
  * <header> - number of header lines at the begining of the acceleration time history file
  * <outcrop> - outcrop motion option
    * 0 - disabled
    * 1 - enabled
  * <save> - save strain-compatible soil properties option
    * 0 - skip
    * 1 - save
  * <iter> - number of iterations
  * <ratio> - ratio between the equivalent uniform and maximum strain
  * <grav> - multiplier for acceleration of gravity
  * <format> - format for reading acceleration values

Note: This instruction is provided for input files. To set the analysis options for the ACS SASSI SOIL module from the ACS SASSI [[SASSI:PREP]] or [[SASSI:Submodeler]], use the Options / Analysis menu option.

ACS SASSI Documentation

User Tools

Site Tools

Page Tools