ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== INTGEN Command ======
INTGEN,<type>,[level skip]

Interaction node generation is a way for the user to quickly change a model from flexible volume to flexible interface or vice versa. Options 1-8 do not remove any interaction nodes that have been previously defined. If the user must remove the interaction nodes, the [[com:INT]] command or the INTGEN command by using INTGEN with option 0 need to be used. Then the user can use the INTGEN command to generate the interaction nodes based on the excavation volume and the type option of the command. The excavation volume must be explicitly defined by [[com:ETYPE]] or [[com:ETYPEGEN]] command for options 1-3 and 5-8. If the ETYPE of the elements is left to default this command will not work. 

  * type – Type of iteration node generation 
    * 0 Set all nodes to non interaction
    * 1 Flexible Volume
    * 2 Flexible interface with Top
    * 3 Flexible interface without top
    * 4 Surface Interaction
    * 5 Flexible interface/volume hybrid Vertical levels
    * 6 Z-level interaction surface
    * 7 X-level interaction surface
    * 8 Y-level interaction surface  
  * level skip - For option 5 number of levels skipped between interaction node levels (default = 1). For options 6,7,8  use level skip to determine the location of the interaction surface to be added.

ACS SASSI Documentation

User Tools

Site Tools

Page Tools