ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== EDGE Command ======

EDGE,<panel>,[X],[Y],[Z]

This command will split a panel groups based on the results of and edge detection algorithm. This command is to be used after the [[com:WALLFLR]] command has created a panel model. The user will select a group with the <panel> argument of the command. The command will identify the external panel edges as well as the edges of any openings in the panel group and use the edges to split the panel group. All new groups will be added to the end of the model. The user can modify the split of the panel ignore all edges found that are parallel to  an axis of the global coordinate system.        

  * panel - group number of the panel to be split
  * X - Flag for edges parallel to the global X coordinate system
    * 0 Use edges (default)
    * 1 Ignore edges
  * Y - Flag for edges parallel to the global Y coordinate system 
    * 0 Use edges (default)
    * 1 Ignore edges
  * Z - Flag for edges parallel to the global Z coordinate system     
    * 0 Use edges (default)
    * 1 Ignore edges

ACS SASSI Documentation

User Tools

Site Tools

Page Tools