ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== BBCGEN Command ======

BBCGEN,<panel>,<ShearModel>,[fc],[fy],[Pn],[Nu],[bre],[bys]

Auto-generate a backbone curve for a panel using the Ultimate Shear value for the panel generated by the [[com:SHEAR]]. This command will always generate a 23 point BBC the first point will always be at (0%,0 Shear force). Point 2 will always be the yield point of the curve. The next 20 points will equidistant spaced along the percentage axis until the ultimate shear is reached. The final point all BBCS will be at (2%,1.02*Ultimate Shear). All of the Shear model variables specified by the user are optional. If the user leaves a shear model argument blank the command will use 0 for that variable.   

  * panel - panel number. If panel = 0 BBCs will be generated for all panels defined by the user.
  * ShearModel - Numeric code for which shear model will be used to generate the backbone curve. The shear model equations can be found in the description of the [[com:SHEAR]] command. The upper or lower bound will be used for the BBC if the calculated shear for ACI 318-08 or Wood 1990 fall outside the bounds specified in the model equations.    
    * 1 - ACI 318-08
    * 2 - Wood 1990
    * 3 - Barda 1972
    * 4 - UB Empirical  
  * fc - compressive strength (psi)
  * fy - reinforcement yield strength (psi) 
  * Pn - web reinforcement ratio (psi)
  * Nu - axial force (lb)
  * bre - boundary element reinforcement area (in^2)
  * bys - boundary element reinforcement yield strength (psi)

ACS SASSI Documentation

User Tools

Site Tools

Page Tools