ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== AOPT Command ======

AOPT,<EQUAKE>,<SOIL>,<DEP>,<SITE>,<POINT>,<HOUSE>,<DEP>,<FORCE>,<ANALYS>,<COMBIN>,<MOTION>,<STRESS>,<RELDISP>,<NONLIN> 

sets the [[com:AFWRITE]] and [[com:CHECK]] options for modules. If <opt> = 0, the corresponding module will not be taken into account by the AFWRITE and CHECK instructions.  

  * <EQUAKE> – Flag for Equake module
  * <SOIL> – Flag for soil module
  * <DEP> – Flag for module that has been deprecated and no longer included in current version ACS-SASSI. These should always be 0
  * <SITE> – Flag for site module
  * <POINT>  – Flag for point module
  * <HOUSE> – Flag for house module
  * <FORCE>  – Flag for force module
  * <ANALYS>  – Flag for analys module
  * <COMBIN>  – Flag for combin module
  * <MOTION>  – Flag for motion module
  * <STRESS>  – Flag for stress module
  * <RELDISP>  – Flag for reldisp module
  * <NONLIN> - Flag for the nonlinear module

**Note:** This instruction is provided for input files. To set the analysis options for the [[com:AFWRITE]] and [[com:CHECK]] instructions from the ACS SASSI [[SASSI:PREP]] and [[SASSI:acs-sassi_user_interface|ACS-SASSI User Interface]], use the Options / Analysis command.

ACS SASSI Documentation

User Tools

Site Tools

Page Tools