ACS SASSI Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== ANALYS Command ======

ANALYS,<opmode>,<type>,<mode>,<save>,<prnt>,<fopt>,<ang>,<xc>,
<yc>,<zc>,<impe>


defines the following analysis options for ACS SASSI [[SASSI:ANALYS]] module:

<opmode> - operation mode\\
  * 0 - complete solution
  * 1 - data check only

<type>	- analysis type\\
  * 0 - seismic
  * 1 - foundation vibration

<mode>	- analysis mode\\
  * 0 - initiation
  * 1 - new structure
  * 2 - new seismic environment
  * 3 - new dynamic loading

<save>	- file save option\\
  * 0 - do not save Files 6\\
  * 1 - save Files 6\\

<prnt>	- print option for transfer functions\\
  * 0 - do not print\\
  * 1 - print\\

<fopt>	- frequency option\\
  * 0 - take frequencies from frequency set\\
  * 1 - take frequencies from File1 (or File9)\\

<ang>	- coordinate transformation angle\\

<xc>	- x-coordinate of control point\\

<yc>	- y-coordinate of control point\\

<zc>	- z-coordinate of control point\\

<impe>	- calculation mode for the global impedances of the foundation\\
  * 0 - no calculations\\
  * 1 - calculate the global impedances and then obtain the transfer functions for the seismic SSI system\\
  * 2 - calculate the global impedances and stop\\

Note: This instruction is provided for input files. To set the analysis options for the ACS SASSI [[SASSI:ANALYS]] module from the ACS SASSI [[SASSI:PREP]] and [[SASSI:Submodeler]], use the Options / Analysis command.

ACS SASSI Documentation

User Tools

Site Tools

Page Tools