User Tools
file:cdb_restrictions
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
file:cdb_restrictions [2017/03/03 14:07] phil |
file:cdb_restrictions [2018/08/06 11:46] (current) phil [COMBIN14] |
||
|---|---|---|---|
| Line 12: | Line 12: | ||
| ==== BEAM4/BEAM44 ==== | ==== BEAM4/BEAM44 ==== | ||
| - | BEAM4/BEAM44 elements are convertible with the following limitations. These beam must be defined with the k node definition. These beam must have properties defined by the RBLOCK and the RBLOCK entry for the property must have either 6, 8, 10, 12 or 19-24 fields defined in the RBLOCK for this element to be converted properly. End releases are defined by KEYOPT 7 and 8. | + | BEAM4/BEAM44 elements are convertible with the following limitations. These beam must be defined with the k node definition. These beam must have properties defined by the RLBLOCK and the RLBLOCK entry for the property must have either 6, 8, 10, 12 or 19-24 fields defined in the RLBLOCK for this element to be converted properly. End releases are defined by KEYOPT 7 and 8. |
| ==== COMBIN14 ==== | ==== COMBIN14 ==== | ||
| - | COMBIN14 elements are convertible with the following limitations. KEYOPT 2 or KEYOPT 3 must be defined for the group. KEYOPT 2 will take precedence if both KEYOPT 2 and KEYOPT 3 are defined. The Spring constant must be defined by the by RBLOCK entry. KEYOPT 2 options 1-6 are supported and options 1 and 2 for KEYOPT 3. | + | COMBIN14 elements are convertible with the following limitations. KEYOPT 2 or KEYOPT 3 must be defined for the group. KEYOPT 2 will take precedence if both KEYOPT 2 and KEYOPT 3 are defined. The Spring constant must be defined by the by RLBLOCK entry. KEYOPT 2 options 1-6 are supported and options 1 and 2 for KEYOPT 3. |
| ==== MASS21 ==== | ==== MASS21 ==== | ||
| - | MASS21 elements are convertible with the following limitations. Mass data must be defined in the RBLOCK entry. KEYOPT(1) and KEYOPT(2) must be set to 0 or not defined in the .cdb for the mass group to be converted properly. | + | MASS21 elements are convertible with the following limitations. Mass data must be defined in the RLBLOCK entry. KEYOPT(1) and KEYOPT(2) must be set to 0 or not defined in the .cdb for the mass group to be converted properly. |
| ==== SOLID45 ==== | ==== SOLID45 ==== | ||
| Line 24: | Line 24: | ||
| ==== SHELL63 ==== | ==== SHELL63 ==== | ||
| - | SHELL63 is convertible with the following limitations. Shell thickness must be defined by RBLOCK entry. | + | SHELL63 is convertible with the following limitations. Shell thickness must be defined by RLBLOCK entry. |
| ==== SHELL181/SHELL281 ==== | ==== SHELL181/SHELL281 ==== | ||
file/cdb_restrictions.1488568041.txt.gz ยท Last modified: 2017/03/03 14:07 by phil
Page Tools
(C) 2013-2019 Ghiocel Predictive Technologies
