User Tools
com:kj
Differences
This shows you the differences between two versions of the page.
|
com:kj [2013/05/31 10:01] phil created |
com:kj [2015/04/07 13:01] (current) phil |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== KJ Commnad ====== | + | ====== KJ Command ====== |
| KJ,<e1>,[<e2>],[<inc>],<k1>,<k2>,...,<k6> | KJ,<e1>,[<e2>],[<inc>],<k1>,<k2>,...,<k6> | ||
| defines the end release code for the BEAMS J node for the element set defined by <e1>, <e2> (default: <e1>), and <inc> (default: 1) from the active group. The active group must be of type BEAMS. The six values <k1> ... <k6> correspond to the force components P1, P2, P3, M1, M2, M3 at the J node and may take the values 1 and 0 only. If one of the element end forces is known to be zero (hinge or roller), the corresponding digit should be set to 1. | defines the end release code for the BEAMS J node for the element set defined by <e1>, <e2> (default: <e1>), and <inc> (default: 1) from the active group. The active group must be of type BEAMS. The six values <k1> ... <k6> correspond to the force components P1, P2, P3, M1, M2, M3 at the J node and may take the values 1 and 0 only. If one of the element end forces is known to be zero (hinge or roller), the corresponding digit should be set to 1. | ||
com/kj.1370008886.txt.gz · Last modified: 2013/05/31 10:01 by phil
Page Tools
(C) 2013-2019 Ghiocel Predictive Technologies
