User Tools
com:cut2sub
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
com:cut2sub [2013/06/26 10:30] phil |
com:cut2sub [2016/10/21 13:32] (current) phil |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| Cut2Sub,<cutnum>,<dest>,[solid] | Cut2Sub,<cutnum>,<dest>,[solid] | ||
| - | This command make a submodel out of a cut defined by the user. The active model and the user defined cut data are used to create the submodel. The user also has the option to create a thick shell model using the solid option. The thick shells should be used for plotting only because the geometry generation algorithm has no way to test if the newly formed solids intersect each other. | + | This command makes a submodel out of a cut defined by the user. The active model and the user defined cut data are used to create the submodel. The user also has the option to create a thick shell model using the solid option. The thick shells should be used for plotting only because the geometry generation algorithm has no way to test if the newly formed solids intersect each other. |
| * cutnum – Number of the cut to be used | * cutnum – Number of the cut to be used | ||
| * dest – number of the destination model | * dest – number of the destination model | ||
| * solid – Turn all shells in to solid elements if solid >= 1 (Default solid = -1) | * solid – Turn all shells in to solid elements if solid >= 1 (Default solid = -1) | ||
com/cut2sub.1372257044.txt.gz · Last modified: 2013/06/26 10:30 by phil
Page Tools
(C) 2013-2019 Ghiocel Predictive Technologies
